|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 污水污物 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
立式排污泵
Vertical sewage pump
“ KAYSEN是工業行業的可靠解決方案合作伙伴，并且是化學液處理的組件和系統的制造商?；谖覀兊膭?chuàng)新產品，服務和針對特定行業的解決方案，我們?yōu)槿蚩蛻籼峁┝烁叩男屎桶踩??！?/strong>
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
耐腐污水泵——上?？偞?/strong>
我們的目標
為客戶提高效率和安全性
我們在全球的市場水處理和化學流體處理
我們的報價
組件，系統，服務和行業特定的解決方案
我們的價值
可靠性
革新
解決方案驅動
全球
Imported pneumatic diaphragm pump——Shanghai distributor
Our goal
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Our offer
Components, systems, services and industry-specific solutions
Our value
reliability
innovation
Solution driven
global
KAYSEN凱森立式排污泵概述
立式排污泵安裝方便，用途廣泛即可作一般管道泵為高層建筑加壓送水之用，又可輸送含有顆粒纖維污水，除適用輸送污水外，還適用于作疏水泵，過濾沖洗冷凝循環泵等。
立式排污泵是應用凱森先進技術的基礎上，結合國內水泵的使用特點而研制成功的新一代泵類產品，具有節能效果顯著、防纏繞、無堵塞、自動安裝和自動控制等特點。在排送固體顆粒和長纖維垃圾方面，具有獨特效果。
該系列排污泵采用獨特葉輪結構和新型機械密封，能有效地輸送含有固體物和長纖維。葉輪與傳統葉輪相比，該泵葉輪采用單流道或雙流道形式，它類似于一截面大小相同的彎管，具有非常好的過流性，配以合理的蝸室，使得該泵具有效率高、葉輪經動靜平衡試驗，使泵在運行中無振動。
主要特點：
●高效節能
●耐腐蝕性
●強度高
●加工方便
●占地面積小
●壽命長
主要應用：
●NL型多用液下泵系單級單吸離心泵，使用于礦山，造紙、印染、環保、石墨、云母、黃金、陶瓷、煉油、石油、化工、農場、鹽場、碘場、染化、釀酒、食品、化 肥、焦化、選廠、建筑、大理石廠、金礦、泥漿、流沙、泥塘、污塘、污濁液送吸濃稠液、裝料及懸浮物質的污水作業，也可作礦排水及含有泥塊的流體。
●若與高壓水泵，水槍配合，組成水力機械化土方工程機組，就可用作于土地平整，河道與池塘的疏浚、鑿開等小型水利工程的挖方與輸方，以及城市的防空工程，地下工程。
●養魚用作帶水清塘、魚池增氧等。
污水泵使用須知：
1、使用電源必須是三相四線制，若無接地線，必須加裝，以防漏電。工作時，須在就近裝有與電機相符的電路熔斷器和幵關，以防葉輪雜物卡死時燒壞電機。
2、本污水泵使用時可不必安裝任何基礎裝置即能運轉，只要斜靠牢固即可，必要時用繩索系牢以防意外。起動后必須檢查電機旋轉方向，不得反轉超過一分鐘。
3、當被吸送的液體中含有較多的雜草、鐵絲、木條、磚塊等雜物時，必須事先盡量清除掉、并可采取加放鐵絲籃等方法，防止雜物吸入泵內造成葉輪打壞，卡死和管道阻塞等事故。
4、泵體在吸泥及其他污濁物后應給予短期吸水，以便沖洗泵體及管道內部。
5、在露天工作時，電機應裝護罩，以防雨水等浸入電機。
6、在河底，池底吸泥宜吊掛在三腳架上，并可擱在浮筒或船上移動作業，在進行土方工程作業時，高壓水沖碎的土塊直徑不得大于吸入口三分之一。
7、本泵規定的轉速是泵的*轉速，不得任意提高；減低轉速使用不限，但功效顯著降低。
8、本污水提升泵在吸送厚泥，濃稠液體或高揚程，長距離輸送泥漿時，負荷降低，但不能用改變結構的方法來增大負荷。
9、一般運轉1250小時左右，進行泵的定期保養，拆卸泵座查看軸承，和泵的密封情況，清洗并更換黃油，必要時更換油封，軸套和其他零件。保養及更換零件的注意事項請見安裝。〈采用機械密封運泵轉3500小時左右進行定期保養）。
10、當長期停止使用時，應將蝸殼拆幵，擦干零件并在相對運動接合表面涂以簿油，存放在干燥地方以備以后使用。
Overview of Germany KAYSEN imported vertical sewage pump
The imported vertical sewage pump is easy to install and has a wide range of uses. It can be used as a general pipeline pump to pressurize water for high-rise buildings. It can also transport sewage containing granular fibers. In addition to transporting sewage, it is also suitable for drainage pumps, filtering and washing condensation cycles. Pump etc.
The vertical sewage pump is a new-generation pump product successfully developed on the basis of Kaysen's advanced technology and combined with the characteristics of domestic water pumps. It has the characteristics of significant energy saving, anti-winding, non-clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long-fiber waste.
This series of sewage pumps adopts a unique impeller structure and a new type of mechanical seal, which can effectively transport solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts a single-channel or double-channel form, which is similar to an elbow with the same cross-section size, and has very good flowability. With a reasonable volute, the pump is efficient The high and impeller have undergone dynamic and static balance tests to ensure that the pump has no vibration during operation.
main feature:
●High efficiency and energy saving
●Corrosion resistance
●High strength
●Convenient processing
●Small footprint
●Long life
main application:
●NL-type multi-purpose submersible pump is a single-stage single-suction centrifugal pump, used in mining, papermaking, printing and dyeing, environmental protection, graphite, mica, gold, ceramics, oil refining, petroleum, chemical, farm, salt farm, iodine field, dyeing and wine making , Food, fertilizer, coking, processing plants, construction, marble factories, gold mines, mud, quicksand, mud ponds, sewage ponds, sewage operation of sludge transfer and absorption of thick liquid, loading and suspended matter, and can also be used for mine drainage and contain Mud fluid.
●If combined with high-pressure water pumps and water guns to form a hydraulic mechanized earthwork unit, it can be used for land leveling, river and pond dredging, excavation and other small water conservancy projects, as well as urban air defense projects, underground projects .
●Fish farming is used to clean the pond with water and increase oxygen in the fish pond.
Instructions for using sewage pump:
1. The power supply must be a three-phase four-wire system. If there is no ground wire, it must be installed to prevent leakage. When working, it is necessary to install a circuit fuse and shutoff that match the motor nearby to prevent the motor from being burnt out when the impeller is stuck.
2. When the sewage pump is used, it can run without installing any basic device, as long as it leans firmly, and if necessary, use a rope to secure it to prevent accidents. The direction of rotation of the motor must be checked after starting, and the reverse rotation must not exceed one minute.
3. When the sucked liquid contains more *s, iron wires, wood strips, bricks and other sundries, it must be removed as much as possible in advance, and iron wire baskets can be added to prevent sundries from being sucked into the pump. Causes accidents such as impeller damage, jamming and pipeline blockage.
4. The pump body should be given short-term water absorption after absorbing mud and other filthy materials to flush the pump body and the inside of the pipeline.
5. When working in the open air, the motor should be equipped with a protective cover to prevent rainwater from entering the motor.
6. At the bottom of the river, the mud suction at the bottom of the pool should be hung on a tripod, and can be placed on a buoy or a ship for mobile operations. During earthwork operations, the diameter of the soil blocks washed by high-pressure water should not be larger than one-third of the suction inlet .
7. The speed specified by this pump is the maximum speed of the pump, and it should not be increased arbitrarily; the reduced speed is unlimited, but the efficiency is significantly reduced.
8. When this sewage lift pump sucks thick mud, thick liquid or high-lift, long-distance mud transportation, the load is reduced, but the structure cannot be changed to increase the load.
9. Normally run for about 1250 hours. Carry out regular maintenance of the pump, disassemble the pump seat to check the bearing and the sealing condition of the pump, clean and replace the butter, replace the oil seal, shaft sleeve and other parts if necessary. For precautions for maintenance and replacement parts, see Installation. <Use mechanical seal to run the pump for about 3500 hours for regular maintenance).
10. When the volute is not used for a long time, the volute should be disassembled, the parts should be wiped dry, and the relative movement joint surface should be coated with thin oil, and stored in a dry place for future use.
關于Kaysen
我們的基礎
KAYSEN全球成功故事的基礎是數十年來的工程專業知識，對應用的深刻理解和不斷創新的高質量產品。因此，該公司集團不斷投資于研發。KAYSEN在全球12個生產基地中也具有高度的垂直整合，從而確保為客戶提供*的質量水平，并確保我們不受供應商市場波動的影響。
我們的宗旨
集成在精心設計的解決方案中的模塊化KAYSEN系列，使我們各行各業的客戶可以隨時隨地在其生產過程中實現*的安全性和效率。
對我們而言，與客戶的親近意味著與客戶一起尋找適合個人需求的正確解決方案。個人，實用的建議和流暢的項目處理與我們?nèi)蚩蛻舴?wù)一樣，都是我們提供的服務的一部分。
我們的承諾
我們熱情地致力于為每個客戶選擇合適的泵，可持續且具有成本效益的解決方案。
在90多個國家/地區，我們自己的銷售，生產和服務公司的大約3,500名員工每天都在努力為每種產品提供快速可靠的服務。由于KAYSEN泵業作為全球市場*的地位，意味著對*產品和服務的持續承諾以及對負責任的思維和行動的義務。
Our foundation
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
Our aim
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
Our promise
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.
