|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 污水污物 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
潛水推流器
“ KAYSEN是工業行業的可靠解決方案合作伙伴，并且是化學液處理的組件和系統的制造商?；谖覀兊膭?chuàng)新產品，服務和針對特定行業的解決方案，我們?yōu)槿蚩蛻籼峁┝烁叩男屎桶踩?。?/strong>
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
潛水推流器——上?？偞?/strong>
我們的目標
為客戶提高效率和安全性
我們在全球的市場水處理和化學流體處理
我們的報價
組件，系統，服務和行業特定的解決方案
我們的價值
可靠性
革新
解決方案驅動
全球
Imported pneumatic diaphragm pump——Shanghai distributor
Our goal
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Our offer
Components, systems, services and industry-specific solutions
Our value
reliability
innovation
Solution driven
global
KAYSEN凱森潛水推流器概述：
凱森低速潛水?dāng)嚢铏C(jī)又稱潛水推流器，低速推流系列QJB型多功能潛水?dāng)嚢铏C(jī)適用于工業和城市污水處理廠曝氣池和厭氧池、大型硝化及反硝化池、圓盤式活性污泥處理池、消毒車及工業攪拌。其產生低切向開放式的強力水流，可實現在大容積流體中產生水循環及硝化、脫氮和除磷階段創建水流等。
主要特點：
●低速推流系列QJB型潛水推流器結構緊湊，體積小，重量輕，操作維護簡單、安裝檢修方便、使用壽命長。
●葉輪具有很好的水力設計結構，工作效率高，后掠式葉片具有自潔功能可防雜物纏繞、堵塞。
●與曝氣系統混合使用可使能耗大幅度降低，充氧量提高，有效防止沉淀。
●電機繞組絕緣等級為F級，防護等級為IP68，選用一次性潤滑免維護軸承，具有油室泄露檢測，使電機的工作更加安全可靠。
●兩道獨立的機械密封，機械密封的摩擦付材質為耐腐蝕的碳化鎢。所有外露緊固件均為不銹鋼材質。
●良好的電纜密封設計，排除了電纜漏水的隱患。
●標準部件采用點解分離技術，可以有效防止腐蝕。
主要應用：
●污水、廢水、污泥水的混合、均勻
●稠化過程
●污泥脫水過程
●傳熱優化
●污水池清潔
●防止顆粒在池壁和池底的凝結和沉淀
●去除懸浮物
●防止結冰
●創建水流
●循環水等
潛水推流器安裝系統：
潛水推流器安裝系統IV主要由手拉葫蘆、起吊架、起吊環鏈、支座、導桿、中間支撐架（池深≤4m時無需配備）、限位架、底座等組成。導桿通過焊接在本體上的鉸軸定位于支架、中間支撐架、底座同心軸線上，并可在水平面內轉動±60°，以適應不同方向攪拌或推流，消除水池中的死區，使水流處于較好運行狀態。潛水?dāng)嚢铏C(jī)通過導輪沿上下移動；起吊架可安裝在支座上并可繞其定位軸線選擇360°，以方便安裝及維護。為增加潛水?dāng)嚢铏C(jī)運行時的可靠性，減緩潛水?dāng)嚢铏C(jī)運行中的振動，一般限位架直接焊接在導桿上，并在潛水?dāng)嚢铏C(jī)與限位架間加設減震塊。限位架焊接在導桿上可在出廠前焊接，也可在現場安裝時焊接。如用戶無特殊要求，一般在出廠前焊接。
Overview of Kaysen imported submersible thruster:
The German Kaysen low-speed submersible mixer is also known as a submersible flow mixer. The low-speed push-flow series QJB multi-functional submersible mixer is suitable for aeration tanks and anaerobic tanks in industrial and urban sewage treatment plants, large-scale nitrification and denitrification tanks, and disc-type activities. Sludge treatment tanks, disinfection vehicles and industrial mixing. It generates a low-tangential open strong water flow, which can realize the water circulation and the creation of water flow in the nitrification, denitrification and dephosphorization stages in a large volume of fluid.
main feature:
●The low-speed push-flow series QJB submersible push-flow device has a compact structure, small volume, light weight, simple operation and maintenance, easy installation and maintenance, and long service life.
●The impeller has a good hydraulic design structure, high working efficiency, and the sweeping blade has a self-cleaning function to prevent debris from winding and blocking.
●Mixed with aeration system can greatly reduce energy consumption, increase oxygenation, and effectively prevent precipitation.
●The insulation grade of the motor winding is F grade, and the protection grade is IP68. The imported disposable lubrication maintenance-free bearings are selected, and the oil chamber leakage detection is adopted to make the motor work more safe and reliable.
●Two independent mechanical seals, the friction of the mechanical seal is made of corrosion-resistant tungsten carbide. All exposed fasteners are made of stainless steel.
●Good cable sealing design eliminates the hidden danger of cable leakage.
●Standard components adopt point solution separation technology, which can effectively prevent corrosion.
main application:
●Mixing and uniformity of sewage, wastewater and sludge water
●Thickening process
●Sludge dewatering process
●Optimization of heat transfer
●Sewage tank cleaning
●Prevent the condensation and precipitation of particles on the wall and bottom of the pool
●Removal of suspended matter
●Prevent freezing
●Create water flow
●Circulating water, etc.
Installation system of imported submersible thruster:
The installation system IV of submersible flow guide is mainly composed of hand chain hoist, lifting frame, lifting chain, support, guide rod, intermediate support frame (no need to be equipped when the pool depth is less than 4m), limit frame, base and so on. The guide rod is positioned on the concentric axis of the bracket, intermediate support frame, and base through the hinge shaft welded to the body, and can be rotated ±60° in the horizontal plane to adapt to the stirring or pushing flow in different directions, eliminating the dead zone in the pool, so that The water flow is in good condition. The submersible mixer moves up and down through the guide wheel; the lifting frame can be installed on the support and can be selected 360° around its positioning axis to facilitate installation and maintenance. In order to increase the reliability of the submersible mixer during operation and slow down the vibration of the submersible mixer during operation, the general limit frame is directly welded to the guide rod, and a damping block is added between the submersible mixer and the limit frame. The limit bracket is welded on the guide rod before being shipped from the factory, or when it is installed on site. If the user has no special requirements, it is generally welded before leaving the factory.
低速潛水推流器系列（注：如用于規則的池型，建議面對面錯開布置）
潛水推流器注意事項極維護：
1. 定期將攪拌器吊起清理葉輪和泵體上的纏繞物，檢查葉輪是否松動損壞，及時維修。
2. 攪拌器運行時觀察液面的運行軌跡，如果非正常及時調整。
3. 觀察攪拌器的固定桿的震動狀況，震動過大需要吊起檢查。
4. 攪拌器正常運行必須全部沒過液面，運行時攪拌器上方應無渦流。
5. 液面低于攪拌器上方形成渦流時攪拌器不允許長時間運行。
6. 定期檢查設備的密封狀況，密封不良及時聯系廠家檢修。
QJB型多功能潛水?dāng)嚢铏C(jī)必須完全潛入水中工作，QJB型多功能潛水?dāng)嚢杞邮軡撊肷疃取?0mm。不能在易燃易爆的環境下或有強腐蝕性液體的環境中工作。若用戶有特殊使用要求，可與我公司技術工程部聯系，我們?yōu)槠涮峁┍容^合理的解決方案。
Matters needing attention and maintenance of diving pusher:
1. Regularly lift the agitator to clean the impeller and the windings on the pump body, check whether the impeller is loose and damaged, and repair it in time.
2. Observe the running track of the liquid level when the agitator is running, and adjust it in time if it is abnormal.
3. Observe the vibration of the stirrer's fixed rod. If the vibration is too large, it needs to be lifted and checked.
4. The normal operation of the agitator must be free of liquid level, and there should be no vortex above the agitator during operation.
5. The agitator is not allowed to run for a long time when the liquid level is below the agitator and vortex is formed.
6. Check the sealing condition of the equipment regularly. If the sealing is bad, contact the manufacturer for repair in time.
QJB type multi-function submersible mixer must be fully submerged to work, QJB type multi-function submersible mixer accepts diving depth ≥90mm. Do not work in flammable and explosive environments or in environments with strong corrosive liquids. If users have special use requirements, they can contact our company's technical engineering department, we provide a more reasonable solution for them.
關于Kaysen
我們的基礎
KAYSEN全球成功故事的基礎是數十年來的工程專業知識，對應用的深刻理解和不斷創新的高質量產品。因此，該公司集團不斷投資于研發。KAYSEN在全球12個生產基地中也具有高度的垂直整合，從而確保為客戶提供*的質量水平，并確保我們不受供應商市場波動的影響。
我們的宗旨
集成在精心設計的解決方案中的模塊化KAYSEN系列，使我們各行各業的客戶可以隨時隨地在其生產過程中實現*的安全性和效率。
對我們而言，與客戶的親近意味著與客戶一起尋找適合個人需求的正確解決方案。個人，實用的建議和流暢的項目處理與我們?nèi)蚩蛻舴?wù)一樣，都是我們提供的服務的一部分。
我們的承諾
我們熱情地致力于為每個客戶選擇合適的泵，可持續且具有成本效益的解決方案。
在90多個國家/地區，我們自己的銷售，生產和服務公司的大約3,500名員工每天都在努力為每種產品提供快速可靠的服務。由于KAYSEN泵業作為全球市場*的地位，意味著對*產品和服務的持續承諾以及對負責任的思維和行動的義務。
Our foundation
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
Our aim
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
Our promise
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.
