|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 水、化工、食品、顏料等 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 氣動 |
| 適用介質 | 水 |
| 是否進口 |
氣動隔膜泵
“ KAYSEN是工業行業的可靠解決方案合作伙伴，并且是化學液處理的組件和系統的制造商?；谖覀兊膭?chuàng)新產品，服務和針對特定行業的解決方案，我們?yōu)?客戶提供了更高的效率和安全性?！?/strong>
"Kaysen is a reliable solution partner for the industrial industry and a manufacturer of components and systems for chemical liquid treatment. Based on our innovative products, services and industry-specific solutions, we provide higher efficiency to customers worldwide And security."
氣動隔膜泵——上海
我們的目標
為客戶提高效率和安全性
我們在 的市場水處理和化學流體處理
我們的報價
組件，系統，服務和行業特定的解決方案
我們的價值
可靠性
革新
解決方案驅動
Imported pneumatic diaphragm pump——Shanghai distributor
Our goal
Improve efficiency and safety for customers
Our global market water treatment and chemical fluid treatment
Our offer
Components, systems, services and industry-specific solutions
Our value
reliability
innovation
Solution driven
global
KAYSEN凱森氣動隔膜泵概述
氣動隔膜泵是目前業內*穎的一種泵類。
氣動隔膜泵采用壓縮空氣為動力源，對于各種腐蝕性液體，帶顆粒的液體，高粘度、易揮發、易燃、劇毒的液體，均能予以抽光吸盡。
泵體采用四種材質，鋁合金、鑄鐵、工程塑料、不銹鋼。根據不同液體介質分別采用丁晴橡膠、氯丁橡膠、氟橡膠、聚四氟乙烯。以滿足不同用戶的需要。
主要特點：
氣動隔膜泵不需灌引水，吸程高達5m，產品揚程可以達到70米左右，出口壓力≥7kgf/cm2; 流動寬敞，通過性能好，允許通過*顆粒直徑達10mm。抽送泥漿、雜質時，對泵磨損甚微; 揚程、流量可通過氣閥開度實現無級調節（氣壓調節在1-7kgf/cm2之間）; 該氣動隔膜泵無旋轉部件，沒有軸封，隔膜將抽送的介質與泵的運動部件、工作介質完全隔開，所輸送的介質不會向外泄漏。所以抽送有毒、易發揮或腐蝕性介質時，不會造成環境污染和危害人身安全; 不必用電，在易燃、易爆場所使用安全可靠; 可以浸沒在介質中工作;
使用方便、工作可靠、開停只需簡單地打開和關閉氣體閥門，即使由于意外情況而長時間無介質運行或突然停機，氣動不銹鋼隔膜泵也不會因此而損壞，不旦超負荷，泵會自動地停機，具有自我保護性能，當負荷恢復正常后，又有自動啟動運行; 結構簡單、易損件少，該氣動不銹鋼隔膜泵結構簡單，安裝、維修方便，泵輸送的介質不會接觸到配氣閥，聯桿等運動部件，不象其他類型的泵因轉子、活塞、齒輪、葉片等部件的磨損而使性能逐步下降; 可輸送較粘的液體（粘度在1萬厘泊以下）; 本泵無須用油潤滑，即使空轉，對氣動不銹鋼隔膜泵也無任何影響。
主要優點：
●使用方便、工作可靠、開停只需簡單地打開和關閉氣體閥門，即使由于意外情況而長時間無介質運行或突然停機泵也不會因此而損壞，一旦超負荷，泵會自動地停機，具有自我保護性能，當負荷恢復正常后，又能自動啟動運行
●結構簡單、易損件少，該泵結構簡單，安裝、維修方便，泵輸送的介質不會接觸到配氣閥，聯桿等運動部件，不像其他類型的泵因轉子、活塞、齒輪、葉片等部件的磨損而使性能逐步下降
●可輸送較粘的液體(粘度在1萬厘泊以下）
●不需灌引水，吸程高達5米，揚程達70米，出口壓力≧7bar
●流動寬敞，通過性能好，允許通過*顆粒直徑達10毫米。抽送泥漿、雜質時，對泵磨損甚微
●本泵無須用油潤滑，即使空轉，對泵也無任何影響
●不必用電，在易燃、易爆場所使用安全可靠
●可以浸沒在介質中工作
●揚程、流量可通過氣閥開度實現無級調節(氣壓調節在1-7bar之間)
●該泵無旋轉部件，沒有軸封，隔膜等抽送的介質與泵的運動部件、工件介質完全隔開，所輸送的介質不會向外泄漏。所以抽送有毒、易揮發或腐蝕性介質時，不會造成環境污染和危害人身安全
主要應用：
●油井鉆好后，用氣動隔膜泵吸沉積物及灌漿。
●吸各種乳劑和填料。
●吸各種污水。
●各種強酸、強堿、強腐蝕液體。
●吸各種高溫液體*可耐150度。
●可以吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。
●礦井、坑道、隧道、選礦、礦渣中的積水。泵吸水泥灌漿及灰漿。
●不銹鋼隔膜泵泵吸各種橡膠漿。
●不銹鋼氣動隔膜泵可以吸各種磨料、腐蝕劑、石油及泥漿、清洗油垢及一般容器。
●可以吸各種劇毒、易燃、易揮發液體。
●不銹鋼氣動隔膜泵可以用于吸油漆、樹膠、顏料。
●不銹鋼氣動隔膜泵作為各種固液體分離設備的前級送壓裝置。
●氣動隔膜泵可以用于為油輪，駁船清倉吸取倉內污水。
●吸啤酒花及發酵粉稀漿、糖漿、糖密。
●粘合劑和膠水、全部種類可用泵吸取。
●各種瓦、瓷、磚器及陶器釉漿。
Germany Kaysen imported pneumatic diaphragm pump overview
Pneumatic diaphragm pump is the most novel pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. It can exhaust all kinds of corrosive liquids, liquids with particles, high-viscosity, volatile, flammable, and highly toxic liquids.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastic, and stainless steel. According to different liquid media, nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene are used. To meet the needs of different users.
main feature:
Pneumatic diaphragm pump does not need irrigation and diversion, suction stroke is up to 5m, product head can reach about 70 meters, outlet pressure ≥ 7kgf/cm2; spacious flow, good passing performance, maximum particle diameter allowed to pass 10mm. When pumping mud and impurities, there is little wear on the pump; the head and flow can be adjusted steplessly through the opening of the air valve (pressure adjustment is between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal, The diaphragm completely separates the pumped medium from the pump's moving parts and working medium, and the delivered medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety; there is no need to use electricity, it is safe and reliable to use in flammable and explosive places; it can be immersed in the medium to work;
It is easy to use, reliable to work, and it only needs to open and close the gas valve to start and stop. Even if there is no medium for a long time due to unexpected conditions or sudden shutdown, the pneumatic stainless steel diaphragm pump will not be damaged by this. Automatically shut down, with self-protection performance, when the load returns to normal, it will automatically start running; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the pump will not touch the medium Valves, connecting rods and other moving parts, unlike other types of pumps, whose performance is gradually reduced due to wear of rotors, pistons, gears, blades and other parts; can transport relatively viscous liquids (viscosity below 10,000 centipoise); This pump does not need to be lubricated with oil, even if idling, it has no effect on the pneumatic stainless steel diaphragm pump.
main advantage:
●Easy to use, reliable in operation, simply open and close the gas valve to start and stop, even if there is no medium running for a long time due to unexpected conditions or the pump is suddenly stopped, it will not be damaged. Once the overload occurs, the pump will automatically stop. With self-protection performance, when the load returns to normal, it can automatically start running
●Simple structure, few wearing parts, simple structure of the pump, easy installation and maintenance, the medium conveyed by the pump will not contact the moving parts such as valve, connecting rod, etc. Unlike other types of pumps due to rotor, piston, gear, The performance of the blade and other components is gradually reduced
●Can transport viscous liquid (viscosity below 10,000 centipoise)
●No need to irrigate and diversion, suction head up to 5 meters, head up to 70 meters, outlet pressure ≧7bar
● Wide flow, good passing performance, allowing the maximum particle diameter to reach 10 mm. When pumping mud and impurities, there is little wear on the pump
●The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump
●No electricity needed, safe and reliable in flammable and explosive places
●Can be immersed in the medium to work
●The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between 1-7bar)
●The pump has no rotating parts, no shaft seal, and the pumped medium such as the diaphragm is completely separated from the pump moving parts and the workpiece medium, and the delivered medium will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety
main application:
●After the oil well is drilled, use pneumatic diaphragm pump to suck sediment and grouting.
●Suck various emulsions and fillers.
●Suction all kinds of sewage.
●Various strong acids, strong bases, strong corrosive liquids.
● Absorb various high-temperature liquids up to 150 degrees.
●It can suck peanut butter, kimchi, mashed potatoes, small red intestine, apple jam, chocolate, etc.
●Water accumulation in mines, tunnels, tunnels, beneficiation and slag. Pumping cement grouting and mortar.
●Stainless steel diaphragm pump pumps various rubber slurries.
●Stainless steel pneumatic diaphragm pump can suck various abrasives, corrosives, petroleum and mud, clean grease and general containers.
●Can absorb all kinds of highly toxic, flammable and volatile liquids.
●Stainless steel pneumatic diaphragm pump can be used to absorb paint, gum and paint.
●Stainless steel pneumatic diaphragm pump is used as the front-stage pressure sending device of various solid-liquid separation equipment.
●Pneumatic diaphragm pump can be used to clean the tanker and barge to absorb the sewage in the tank.
●Sucker hops and baking powder slurry, syrup, syrup.
●Adhesive and glue, all types can be sucked by pump.
●Various tile, porcelain, brick and pottery glaze slurry.
關于Kaysen
我們的基礎
KAYSEN 成功故事的基礎是數十年來的工程專業知識，對應用的深刻理解和不斷創新的高質量產品。因此，該公司集團不斷投資于研發。KAYSEN在 12個生產基地中也具有高度的垂直整合，從而確保為客戶提供*的質量水平，并確保我們不受供應商市場波動的影響。
我們的宗旨
集成在精心設計的解決方案中的模塊化KAYSEN系列，使我們各行各業的客戶可以隨時隨地在其生產過程中實現*的安全性和效率。
對我們而言，與客戶的親近意味著與客戶一起尋找適合個人需求的正確解決方案。個人，實用的建議和流暢的項目處理與我們 客戶服務一樣，都是我們提供的服務的一部分。
我們的承諾
我們熱情地致力于為每個客戶選擇合適的泵，可持續且具有成本效益的解決方案。
在90多個國家/地區，我們自己的銷售，生產和服務公司的大約3,500名員工每天都在努力為每種產品提供快速可靠的服務。由于KAYSEN泵業作為 市場*的地位，意味著對*產品和服務的持續承諾以及對負責任的思維和行動的義務。
Our foundation
KAYSEN's global success story is based on decades of engineering expertise, a deep understanding of applications and continuous innovation of high-quality products. As a result, the company group continuously invests in research and development. KAYSEN also has a high degree of vertical integration in 12 production bases around the world, thus ensuring to provide customers with an excellent level of quality and ensuring that we are not affected by supplier market fluctuations.
Our aim
The modular KAYSEN series integrated in carefully designed solutions enables our customers from all walks of life to achieve maximum safety and efficiency in their production processes anytime, anywhere.
For us, closeness to customers means working with customers to find the right solution for their individual needs. Personal, practical advice and smooth project handling are all part of the service we provide, just like our global customer service.
Our promise
We are passionately committed to choosing the right pump for each customer, sustainable and cost-effective solution.
In more than 90 countries, approximately 3,500 employees of our own sales, production and service companies work hard every day to provide fast and reliable service for each product. The status of KAYSEN Pumps as a global market leader implies a continuous commitment to excellent products and services and an obligation to responsible thinking and action.
