|
- 品牌：德國KAYSEN
- 貨號：KS8369679
- 發布日期： 2019-10-12
- 更新日期： 2024-10-21
| 外型尺寸 | |
| 貨號 | KS8369679 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
濃漿泵-轉子泵-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
濃漿泵是一種單螺桿式輸送泵，它的主要工作部件是偏心螺旋體的螺桿（稱轉子）和內表面呈雙線螺旋面的螺桿襯套（稱定子）。濃漿泵中凡接觸物料的金屬零件均選用優質不銹鋼制作，襯筒采用無毒無味的信用橡膠，工作溫度可達100℃可用于輸送食品漿料和粘度1-1000000厘泊含有固體顆?；蚰z圬的溶液漿，懸浮液的腐蝕介質。
主要特點：
●可輸送高濃度高粘度1-1000000厘泊溶液漿
●自吸能力強，不用裝底閥可直接抽吸液體。
●運轉平穩、振動、噪聲小。
●結構簡單、拆裝維修方便。
主要應用：濃漿泵故障排除
適應高粘度介質的特殊輸送，尤其在化工廠、釀造廠、食品廠、造紙廠、罐頭廠、藥廠、酒廠等單位使用廣泛，基于此，濃漿泵得到全國各工礦企業、各科研單位普遍征用，效果良好。
濃漿泵故障排除：
螺桿濃漿泵啟動困難:螺桿濃漿泵料液未充滿泵腔，摩擦阻力較大。
螺桿濃漿泵填料壓蓋壓得過緊，軸與填料之間有摩擦力矩過大:用管子鉗搬動聯軸器泵主軸3～6轉,調整填料壓蓋。
螺桿濃漿泵啟動后不出料液:螺桿濃漿泵有大量空氣吸入;
螺桿濃漿泵電動機轉向不對;
螺桿濃漿泵料液粘度過大:檢查吸入口液位是否太低，吸入管是否漏氣;調接電動機的任意兩相進線;稀釋料液。
螺桿濃漿泵有圈套的振動或噪音,螺桿濃漿泵電動機與泵軸不同心;
螺桿濃漿泵漿泵泵內吸入空氣或料液混有大量空氣。重新調整同軸度;檢查料液位，設法排除吸入液中的空氣。
螺桿濃漿泵運行過程中，流量顯著下降,螺桿濃漿泵襯套磨損，間隙增大。
螺桿濃漿泵轉速降低。
螺桿濃漿泵萬向聯軸節或繞軸損壞傳動失效;
螺桿濃漿泵遇到故障問題了有什么解決辦法？
螺桿濃漿泵吸入管路浸入液體深度不夠，有空氣進入泵內,更換襯套，必要時換螺桿;檢查電源和電機;停機檢修，更換軸聯軸節或繞軸;減小吸入高度，增加浸入深度，拔除吸入料液中空氣。
螺桿濃漿泵電動機超載,濃漿泵揚程超過泵的揚程式過多;
螺桿濃漿泵料液粘度太大。
螺桿濃漿泵電壓太低,盡量減小管路水頭損失，或更換高揚程泵。稀釋料液;檢查原因，提高電壓至規定值。
螺桿濃漿泵軸封填料處大量漏液,濃漿泵壓蓋過松;螺桿濃漿泵填料磨損;
螺桿濃漿泵進出口位置相反,調整壓蓋;更換填料;以中間法蘭口為吸入口。
選型時必需的主要運行數據有：
螺桿濃漿泵輸送介質名稱、腐蝕性、磨蝕性、粘度、固體含量、工作溫度;
運行參數流量或流量范圍、*壓力、連續或間斷運行;
安裝環境臥式或立式、固定或移動、連接管路的特殊要求、防爆防護要求。
Rotor pump
Emulsifying pump
Positive displacement pump
The thick slurry pump is a single-screw transfer pump. Its main working components are the screw of the eccentric spiral (called the rotor) and the screw bushing (called the stator) with the double-sided spiral surface on the inner surface. The metal parts of the thick slurry pump are made of high quality stainless steel. The liner is made of non-toxic and tasteless credit rubber. The working temperature can reach 100°C. It can be used to transport food slurry and viscosity 1-1000000 centipoise containing solid particles or glue. A solution of cerium, a corrosive medium for the suspension.
main feature:
●It can transport high concentration and high viscosity 1-1000000 centipoise solution slurry
●The self-priming ability is strong, and the liquid can be directly sucked without the bottom valve.
● Smooth operation, vibration and low noise.
●Simple structure, convenient disassembly and assembly.
Main application: Troubleshooting of thick slurry pump
It is suitable for special transportation of high-viscosity medium, especially in chemical plants, breweries, food factories, paper mills, canneries, pharmaceutical factories, wineries, etc. Based on this, the thick slurry pump has obtained various industrial and mining enterprises and scientific research units in the country. Universal requisition, the effect is good.
Thickener pump troubleshooting:
Difficulty in starting the screw slurry pump: the screw slurry pump fluid does not fill the pump chamber and the frictional resistance is large.
The screw grouting pressure of the screw thick pump is too tight, and the friction torque between the shaft and the packing is too large: use the pipe wrench to move the main shaft of the coupling pump 3 to 6 turns, and adjust the packing gland.
After the screw slurry pump is started, no liquid is discharged: the screw slurry pump has a large amount of air inhalation;
The screw slurry pump motor is not turning right;
The viscosity of the screw slurry pump liquid is too large: check if the liquid level of the suction port is too low, and whether the suction pipe leaks; adjust any two-phase incoming line of the motor; dilute the liquid.
The screw thick slurry pump has a trap of vibration or noise, and the screw thick pump motor is not concentric with the pump shaft;
The inhaled air or the liquid in the pump of the screw slurry pump is mixed with a large amount of air. Re-adjust the concentricity; check the level of the material and try to remove the air from the inhalation.
During the operation of the screw slurry pump, the flow rate drops significantly, and the screw slurry pump bushing wears and the gap increases.
The screw slurry pump speed is reduced.
The screw joint pump or the shaft is damaged by the screw thick pump;
What is the solution to the problem of the screw slurry pump encountering the fault?
The screw slurry pump suction line is not deeply immersed in the liquid, there is air entering the pump, the bushing is replaced, and the screw is changed if necessary; check the power supply and the motor; stop the repair, replace the shaft coupling or the shaft; reduce the suction height, increase At the immersion depth, remove the air from the suction liquid.
The screw thick pump motor is overloaded, and the lift pump head exceeds the pump's excessive lift;
The viscosity of the screw slurry pump liquid is too large.
The screw slurry pump voltage is too low, try to reduce the pipe head loss, or replace the high lift pump. Dilute the liquid; check the cause and increase the voltage to the specified value.
A large amount of liquid is leaked from the shaft seal packing of the screw thick slurry pump, and the thick slurry pump cover is too loose; the screw thick slurry pump packing wears;
The inlet and outlet of the screw slurry pump are opposite in position, and the gland is adjusted; the packing is replaced; the intermediate flange port is used as the suction port.
The main operational data required for the selection is:
The screw slurry pump conveys the name of the medium, corrosivity, abrasion, viscosity, solid content, working temperature;
Operating parameter flow or flow range, maximum pressure, continuous or intermittent operation;
Installation environment Horizontal or vertical, fixed or moving, connecting pipeline special requirements, explosion protection requirements.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
