国产午夜亚洲精品理论片,黄色成人传媒片在线播放,亚洲窝窝色影院之寻求快感,久久亚洲Av无码精品午夜麻

乳化泵-轉子泵-KAYSEN泵業

GERMANY KAYSEN PUMP CO .,LTD

BRL3三級管線式分散乳化機，衛生級設計，在線CIP，零件表面均作精細拋光處理。工作腔內裝有三組定、轉子（細齒，中齒，粗齒），物料由軸向輸入，經過三組定轉子的高剪切分散、乳化、均質后由徑向輸出，對物料處理更精細。

主要特點：

●粒徑分布范圍窄，勻度高

●省時、高效、節約能耗

●噪音低，運轉平穩

●消除批次間生產的品質差異

●無死角，物料 100% 通過分散剪切

●具有短距離、低揚程輸送功能，可實現循環處理

●操作簡單，維修方便

●可實現自動化控制

主要應用：
●混合：糖漿、香波、洗滌液、果汁濃縮液。酸奶、甜點、混合奶制品、油墨、瓷釉、
●分散混合：甲基纖維素溶液、膠質體溶液、碳化物溶液、油水乳化預混合、調味料生產、穩定劑溶液、煙塵、鹽、氧化鋁、農藥。
●分散：懸浮液、藥丸包衣、藥物解聚、涂料分散、唇膏、蔬菜濃湯、芥末混合物、催化劑。消光劑、金屬、顏料、改性瀝青、納米材料的制備和解聚。
●乳化：藥乳液、藥膏、雪花膏、面膜、面霜、乳化香精、油水乳化、樹脂乳化、拉乳化、水性聚氨酯乳化、農藥、
●均值：藥乳液、藥膏、雪花膏、面膜、面霜、組織均漿、奶制品、果汁、打印墨水、果醬

乳化泵常見故障及排除法：
故障 產生原因 排除方法 啟動后無壓力或調不上壓力
1、先導閥的中、下節流孔堵塞； 2、卸載閥主閥卡住，或已損壞； 3、推力活塞處的密封圈損壞； 4、卸載閥先導閥卡住

Rotor pump

Emulsifying pump

Positive displacement pump

BRL3 three-stage pipeline type dispersion emulsifier, sanitary design, online CIP, and fine polished surface of parts. There are three sets of stator and rotor (fine tooth, middle tooth, coarse tooth) in the working chamber. The material is input from the axial direction. After three sets of stator and rotor, the high shear dispersion, emulsification and homogenization are followed by radial output. fine.

main feature:

●The particle size distribution range is narrow and the formation is high

● Time saving, high efficiency and energy saving

●Low noise and smooth operation

● Eliminate the quality difference between batch production

● No dead angle, material 100% by dispersion shear

●With short distance and low lift conveying function, it can realize cycle processing

● Easy to operate and easy to maintain

●Automatic control

main application:

● Mixing: syrup, shampoo, washing liquid, juice concentrate. Yogurt, dessert, mixed dairy products, ink, enamel,

● Dispersion and mixing: methyl cellulose solution, colloidal solution, carbide solution, oil-water emulsion premixing, seasoning production, stabilizer solution, soot, salt, alumina, pesticide.

● Dispersion: suspension, pill coating, drug depolymerization, paint dispersion, lipstick, vegetable puree, mustard mixture, catalyst. Preparation and depolymerization of matting agents, metals, pigments, modified asphalts, nanomaterials.

●Emulsification: drug lotion, ointment, cream, mask, face cream, emulsified essence, oil-water emulsification, resin emulsification, emulsification, water-based polyurethane emulsification, pesticide,

● Mean: drug lotion, ointment, cream, mask, face cream, tissue homogenate, dairy products, juice, printing ink, jam

Emergent pump common faults and elimination methods:

Fault Cause Remedy No pressure or pressure after starting

1. The middle and lower orifices of the pilot valve are blocked; 2. The main valve of the unloading valve is stuck or damaged; 3. The sealing ring at the thrust piston is damaged; 4. The unloading valve pilot valve is stuck.

Fault Cause Remedy

No pressure or adjustment after starting. 1. The middle and lower orifices of the pilot valve are blocked.

2. The main valve of the unloading valve is stuck or damaged.

3. The seal ring at the thrust piston is damaged;

4. The unloading valve pilot valve is stuck or damaged; 1. The throttle block is blocked;

2. Check if the main valve is stuck or damaged;

3. Replace the seal ring at the thrust piston;

4. Check if the pilot valve is stuck or damaged;

The pressure pulsation is large, the flow is insufficient or no flow, and even the pipeline vibrates, the noise is serious. 1. The air in the pump suction chamber is not drained;

2. At the plunger seal ring, the air intake when aspirating;

3. The liquid suction hose is too long or too long;

4. The spring of the suction and discharge valve is broken or the spool is damaged;

5. The suction valve screw plug is not tightened;

6. The liquid suction filter of the liquid tank is blocked; 1. Loosen the pump bleed screw and release the heavy air;

2. Take out the drain valve and fill the plunger chamber with liquid;

3. Change the suction hose or eliminate the dead bend;

4. Replace the spring or replace the valve core;

5. Tighten the suction valve screw plug;

6. The liquid suction filter of the cleaning liquid tank;

Leakage at the plunger seal is severe. 1. The plunger seal is worn or damaged.

2. The surface of the plunger is severely scratched and pulled; 1. Replace the sealing ring;

2. Replace or repair the plunger;

When the pump is running, the noise is large, and there is a crashing sound. 1. The bearing bush clearance is increased;

2. There are debris in the pump;

3. The axis of the motor and the pump are different axes;

4. There is a gap between the plunger and the pressure block; 1. Replace the bearing bush;

2, clear debris;

3. Adjust the motor and pump to make it coaxial;

4. Tighten the compression nut;

The temperature of the cabinet is too high 1. The lubricating oil is too dirty or insufficient;

2. Damage to the bearing bush or cranking of the crankshaft; 1. Refuel or clean the oil pool and change the oil;

2. Repair the crankshaft and change the bearing bush;

The pump pressure suddenly rises above the unloading valve setting pressure or the relief valve setting pressure. 1. The upper or lower throttle plug of the pilot valve is blocked;

2. The pressure regulating screw sleeve of the pilot valve is mis-adjusted;

3, the safety valve fails; 1, dredge throttle block;

2. Reset the pressure;

3. Check and adjust or replace the safety valve;

When the bracket stops feeding, the unloading valve moves frequently. 1. The bracket system leaks seriously;

2. The unloading valve check valve leaks;

3. Leakage of the pilot valve; 1. Eliminate the leaking part of the working face bracket;

2. Check and replace the check valve;

3. Check the valve surface and seal of the pilot valve;

The temperature of the emulsion is high. 1. The sealing ring of the pilot valve is damaged.

2. There is overflow at the check valve; 1. Check the o-ring seal of the pilot valve;

2. Check the check valve for damage;

       位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。

        凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.