|
- 品牌：德國KAYSEN
- 貨號：KS5819569
- 發布日期： 2019-10-11
- 更新日期： 2024-10-21
| 外型尺寸 | |
| 貨號 | KS5819569 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
潛水推流器-推流器-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
凱森低速潛水?dāng)嚢铏C(jī)又稱潛水推流器，低速推流系列QJB型多功能潛水?dāng)嚢铏C(jī)適用于工業和城市污水處理廠曝氣池和厭氧池、大型硝化及反硝化池、圓盤式活性污泥處理池、消毒車及工業攪拌。其產生低切向開放式的強力水流，可實現在大容積流體中產生水循環及硝化、脫氮和除磷階段創建水流等。
主要特點：
●低速推流系列QJB型潛水推流器結構緊湊，體積小，重量輕，操作維護簡單、安裝檢修方便、使用壽命長。
●葉輪具有很好的水力設計結構，工作效率高，后掠式葉片具有自潔功能可防雜物纏繞、堵塞。
●與曝氣系統混合使用可使能耗大幅度降低，充氧量提高，有效防止沉淀。
●電機繞組絕緣等級為F級，防護等級為IP68，選用一次性潤滑免維護軸承，具有油室泄露檢測，使電機的工作更加安全可靠。
●兩道獨立的機械密封，機械密封的摩擦付材質為耐腐蝕的碳化鎢。所有外露緊固件均為不銹鋼材質。
●良好的電纜密封設計，排除了電纜漏水的隱患。
●標準部件采用點解分離技術，可以有效防止腐蝕。
主要應用：
●污水、廢水、污泥水的混合、均勻
●稠化過程
●污泥脫水過程
●傳熱優化
●污水池清潔
●防止顆粒在池壁和池底的凝結和沉淀
●去除懸浮物
●防止結冰
●創建水流
●循環水等
潛水推流器安裝系統：
潛水推流器安裝系統IV主要由手拉葫蘆、起吊架、起吊環鏈、支座、導桿、中間支撐架（池深≤4m時無需配備）、限位架、底座等組成。導桿通過焊接在本體上的鉸軸定位于支架、中間支撐架、底座同心軸線上，并可在水平面內轉動±60°，以適應不同方向攪拌或推流，消除水池中的死區，使水流處于較好運行狀態。潛水?dāng)嚢铏C(jī)通過導輪沿上下移動；起吊架可安裝在支座上并可繞其定位軸線選擇360°，以方便安裝及維護。為增加潛水?dāng)嚢铏C(jī)運行時的可靠性，減緩潛水?dāng)嚢铏C(jī)運行中的振動，一般限位架直接焊接在導桿上，并在潛水?dāng)嚢铏C(jī)與限位架間加設減震塊。限位架焊接在導桿上可在出廠前焊接，也可在現場安裝時焊接。如用戶無特殊要求，一般在出廠前焊接。
低速潛水推流器系列（注：如用于規則的池型，建議面對面錯開布置）
潛水推流器注意事項極維護：
1. 定期將攪拌器吊起清理葉輪和泵體上的纏繞物，檢查葉輪是否松動損壞，及時維修。
2. 攪拌器運行時觀察液面的運行軌跡，如果非正常及時調整。
3. 觀察攪拌器的固定桿的震動狀況，震動過大需要吊起檢查。
4. 攪拌器正常運行必須全部沒過液面，運行時攪拌器上方應無渦流。
5. 液面低于攪拌器上方形成渦流時攪拌器不允許長時間運行。
6. 定期檢查設備的密封狀況，密封不良及時聯系廠家檢修。
QJB型多功能潛水?dāng)嚢铏C(jī)必須完全潛入水中工作，QJB型多功能潛水?dāng)嚢杞邮軡撊肷疃取?0mm。不能在易燃易爆的環境下或有強腐蝕性液體的環境中工作。若用戶有特殊使用要求，可與我公司技術工程部聯系，我們?yōu)槠涮峁┍容^合理的解決方案。
Germany Kaysen low-speed submersible mixer is also called submersible pusher. Low-speed push flow series QJB multi-function submersible mixer is suitable for industrial and urban sewage treatment plant aeration tank and anaerobic tank, large-scale nitrification and denitrification tank, disc type active Sludge treatment tank, disinfection vehicle and industrial mixing. It produces a low tangential open type of strong water flow, which can produce water circulation in large volume fluids and create water flow in the stages of nitrification, denitrification and phosphorus removal.
main feature:
●The low-speed push flow series QJB type submersible pusher is compact in structure, small in size, light in weight, simple in operation and maintenance, convenient in installation and maintenance, and long in service life.
●The impeller has a good hydraulic design structure and high working efficiency. The swept-back blade has a self-cleaning function to prevent entanglement and blockage of debris.
●In combination with the aeration system, energy consumption can be greatly reduced, oxygenation can be increased, and precipitation can be effectively prevented.
●The motor winding insulation grade is F grade, the protection grade is IP68, the imported one-time lubrication maintenance-free bearing is selected, and the oil chamber leakage detection is adopted to make the work of the motor more safe and reliable.
● Two independent mechanical seals, the friction of the mechanical seal is made of corrosion-resistant tungsten carbide. All exposed fasteners are made of stainless steel.
●Good cable sealing design eliminates the hidden danger of cable leakage.
●Standard parts use point-separation technology to prevent corrosion.
main application:
● Mixing and uniforming of sewage, wastewater and sludge water
● Thickening process
● Sludge dewatering process
● Heat transfer optimization
●Sewage pool cleaning
● Prevent condensation and precipitation of particles on the pool wall and bottom of the pool
●Removing suspended solids
● Prevent icing
●Create water flow
●Circulating water, etc.
Imported diving thruster installation system:
The submersible pusher installation system IV mainly consists of chain hoists, lifting jibs, hoisting rings, supports, guides, intermediate support frames (no need to be equipped when the depth is ≤ 4m), limit brackets, bases, etc. The guide rod is positioned on the bracket, the intermediate support frame and the concentric axis of the base by the hinge shaft welded on the body, and can be rotated by ±60° in the horizontal plane to adapt to the stirring or pushing flow in different directions, thereby eliminating the dead zone in the pool and making The water flow is in good working condition. The submersible mixer moves up and down through the guide wheel; the lifting bracket can be mounted on the support and can be 360° around its positioning axis for easy installation and maintenance. In order to increase the reliability of the operation of the submersible mixer and slow down the vibration during the operation of the submersible mixer, the general limit frame is directly welded on the guide rod, and a shock absorber block is added between the submersible mixer and the limit frame. The limit bracket is welded to the guide rod and can be welded before leaving the factory or welded during field installation. If the user has no special requirements, it is usually welded before leaving the factory.
Low-speed submersible pusher series (Note: If used for regular pool type, it is recommended to face-to-face staggered arrangement)
Diving thruster precautions Extreme maintenance:
1. Rinse the stirrer regularly to clean the windings on the impeller and the pump body, check whether the impeller is loose and damaged, and repair it in time.
2. Observe the running track of the liquid level when the agitator is running, if it is not adjusted properly.
3. Observe the vibration condition of the stirrer's fixed rod. If the vibration is too large, it needs to be lifted and checked.
4. The mixer must be operated without any liquid level. There should be no eddy current above the stirrer during operation.
5. The stirrer is not allowed to run for a long time when the liquid level is lower than the vortex above the stirrer.
6. Regularly check the sealing condition of the equipment. If the sealing is poor, contact the factory for repair.
The QJB multi-function submersible mixer must be fully submerged into the water. The QJB multi-purpose submersible agitation accepts a submerged depth of ≥90mm. Do not work in a flammable or explosive environment or in a highly corrosive liquid environment. If the user has special requirements, please contact our technical engineering department, we provide a more reasonable solution.
Cutting submersible sewage pump
Diving flow booster
Submersible mixed flow pump
Submersible return pump
Corrosion resistant sewage pump
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
