|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 水、油漆、污水、化工液體等等 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口電動隔膜泵 進口隔膜泵304316
德國KAYSEN凱森進口電動隔膜泵概述：
德國凱森進口電動隔膜泵采用擺線針輪減速機傳動，通過曲軸滑塊機構帶動雙隔膜作往復運動，使工作腔容積發生交替變化從而達到將液體不斷地吸入和排出，近年來，由于在隔膜材質上取得了突破性的進展，進口電動隔膜泵廣泛應用于石化、陶瓷、冶金等行業。進口電動隔膜泵特點是不需灌引水，自吸能力強，噪音小。直接將被輸送介質和傳動機械件分開，所以介質*不會向外泄漏。且泵本身無軸液封，使用壽命大大延長。應用領域：噴漆、陶瓷業中隔膜泵已占有*的主導地位；環保、廢水處理、建筑、排污、精細化工中正在擴大它的市場份額，并具有其他泵不可替代的地位。
主要優點：
●不需灌引水，自吸能力達7米以上。
●通過性能好，直徑在10毫米以下的顆粒、泥漿等均可以毫不費力地通過。
●由于隔膜將被輸送介質和傳動機械件分開，所以介質*不會向外泄漏。且泵本身無軸封，使用壽命大大延長。根據不同介質，隔膜分為氯丁橡膠、氟橡膠、丁晴橡膠等，完全可以滿足不同用戶的要求。
●體積小重量輕：由于采用了行星擺線傳動結構，故使泵型獲得小尺寸如與同類型泵來比較，其體積重量均下降一半左右。
●泵體介質流經部份，可根據用戶要求，分為鑄鐵、不銹鋼、襯膠、電機分為普通式、防爆式、變頻式、電磁調速式，該泵正應用在下列場合。
Germany Kaysen imported electric diaphragm pump overview:
Germany Kaysen imported electric diaphragm pump adopts cycloidal pinwheel reducer transmission, which drives the double diaphragm to reciprocate through the crank slider mechanism, so that the working chamber volume changes alternately to achieve continuous suction and discharge of liquid. In recent years, due to Breakthrough progress has been made in diaphragm materials, and diaphragm pumps are widely used in petrochemical, ceramic, metallurgical and other industries. The diaphragm pump is characterized by no need to irrigate water, strong self-priming ability and low noise. The transported medium and the transmission mechanism are separated directly, so the medium will never leak out. Moreover, the pump itself has no shaft liquid seal and the service life is greatly extended. Application field: The diaphragm pump in the paint and ceramic industry has occupied an absolute dominant position; environmental protection, wastewater treatment, construction, sewage, fine chemicals are expanding its market share and have irreplaceable status as other pumps.
The main advantage:
● No need to irrigate water, self-priming capacity of more than 7 meters.
● Through good performance, particles, mud, etc. with a diameter of less than 10 mm can be passed without difficulty.
● Since the diaphragm will be separated by the conveying medium and the transmission mechanism, the medium will never leak out. Moreover, the pump itself has no shaft seal and the service life is greatly extended. According to different media, the diaphragm is divided into neoprene rubber, fluoro rubber, nitrile rubber, etc., which can fully meet the requirements of different users.
● Small size and light weight: Due to the use of the planetary cycloidal transmission structure, the pump type is obtained in a small size, such as compared with the same type of pump, its volume and weight are reduced by about half.
●The pump medium flows through the part, which can be divided into cast iron, stainless steel, rubber lined, motor divided into common type, explosion-proof type, frequency conversion type and electromagnetic speed control type according to user requirements. The pump is used in the following occasions.
Germany Kaysen imported pneumatic diaphragm pump overview
The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.
main feature:
The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;
Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口電動隔膜泵 進口隔膜泵304316
